6 Best HDMI Touchscreen Portable Monitors in 2026
Six HDMI touchscreen portable monitors compared, with the separate USB cable touch needs explained for laptops, mini PCs and Raspberry Pi setups.
New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free
At a Glance
HDMI is the most common way to connect a portable screen to a mini PC, a Raspberry Pi or an older laptop, but HDMI only moves picture and sound. Fingers on the glass produce a different signal, and that signal needs its own USB path, which is why so many buyers plug in an HDMI touch monitor and find that taps do nothing.
We evaluated six HDMI touch monitors from 7 to 15.6 inches, reading each listing for how touch is wired, what operating systems it names and what size of desk it fits. Sizes here are taken from each listing, and touch is only credited where the seller states it. Several are sold mainly to Raspberry Pi makers, so we note where that audience matters.
5 Criteria to Look For Before Buying a HDMI Touchscreen Portable Monitor
Key buying criteria so you get the right fit the first time.
Why HDMI alone has no touch
HDMI is a one-way video and audio format. Touch is a USB input device, the same family as a mouse, so it needs a USB cable back to the computer. If the listing says touch works over HDMI, look for the words plus USB-A to USB-C or USB-B touch input in the same bullet.
USB-B, USB-A and USB-C touch leads
Different monitors carry touch on different plugs: the JUNEBOX uses a USB-B port, the InnoView takes a USB-A to USB-C cable, and the MAFNKOU uses a full-featured USB-C port. Buying a spare cable of the wrong type is a common mistake. Check the box contents for the exact touch cable.
Touch points by operating system
Ten-point touch lets you pinch and rotate with several fingers, but listings often cut it down: the VIEWMEI gives single-point touch on Raspberry Pi OS and the ELECROW gives five-point on Windows. A touch point count is not the same on every system. Read the operating system line under the touch bullet.
Resolution at small sizes
A 7-inch 1024 x 600 panel looks fine for a dashboard, but the same pixel count on a 10-inch screen shows larger, softer text. A 1280 x 800 panel at 10.1 inches is sharper, and 1920 x 1200 at 13.3 inches is sharper still. Compare the pixel numbers to the diagonal, not just the word HD.
Power source and adapter
A bright touch panel with speakers needs steady power, and some sellers state a 15W or higher charger is needed, with the adapter not included. A weak port causes flicker or a screen that blinks off. Check the listing for adapter not included and add one to your cart.
6 Best HDMI Touchscreen Portable Monitors in 2026
JUNEBOX 13.3" HDMI Touchscreen Monitor
About this pick
The JUNEBOX 13.3-inch is a 1920 x 1080 IPS panel with 400 nits, 1000:1 contrast and 10-point touch. Its port list is the most honest about the wiring: an HDMI port and a VGA port bring in the picture, a USB-B port carries touch input, and four USB-A ports let you hang a keyboard, mouse or drive off the screen itself.
Compared with the thinner USB-C monitors below it, this one is a fixed-desk design. It weighs 1.21 kg, has a foldable stand that opens to 85 degrees and a 75 x 75 mm VESA interface, and the listing mentions optional glove-touch support.
Choose it for a workbench, kiosk or lab where an HDMI source and a USB cable are always available. It is heavier than the USB-C portables, so it suits daily carry less.
Best for: workbench and kiosk setups with an HDMI source
Check price on AmazonPros
- +Separate USB-B touch cable
- +Four USB-A ports built in
- +VESA mount and foldable stand
- +Dual speakers included
Cons
- −1.21 kg is heavy for travel
- −No USB-C video listed
MAFNKOU 13.3" Touchscreen Portable Monitor
About this pick
The MAFNKOU is a 13.3-inch 1920 x 1200 16:10 IPS panel with 10-point capacitive touch, narrow bezels and a cover that folds into a stand. It connects by USB-C or HDMI.
Its listing states the rule this guide is about: a full-featured USB-C port can carry video, power and touch on one cable, but when HDMI is used an additional USB connection is required for touch. It names touch support for Windows, macOS and Android devices.
The same listing says touch is not supported on iPhone, iPad, PS5, Xbox or other consoles, so it is a laptop and phone-friendly screen, not a console touch panel. It is the lighter, cheaper alternative to the JUNEBOX when you want a USB-C first design with HDMI as backup.
Best for: laptop owners who want HDMI as a backup, not the main link
Check price on AmazonPros
- +Taller 16:10 panel
- +Windows, macOS and Android touch
- +Cover doubles as a stand
- +Lower cost
Cons
- −No touch on consoles or iPads
- −HDMI use needs an extra USB lead
InnoView 15.6" HDMI Touchscreen Monitor
About this pick
The InnoView is a 15.6-inch 1080p IPS panel with 10-point touch, a 1200:1 contrast ratio, two full-function USB-C ports and a standard HDMI port. It includes a protective sleeve and a 90 degree built-in stand, and carries an 18-month warranty according to the listing.
For HDMI use the seller says to connect HDMI plus a power cable plus a USB-A to USB-C cable, and adds that touch will not work if that lead is not connected. It also says every connection needs a separate power cord with a 15W or higher adapter, which is not included.
It is the pick for a larger screen where HDMI is the only video route. The listing lists devices that cannot use touch, such as PS3 to PS5, Switch, Xbox, Steam Deck and iPhone or iPad, so keep expectations to PCs and Macs.
Best for: HDMI-only desktops that want a bigger touch screen
Check price on AmazonPros
- +Largest screen in the group
- +Sleeve and stand included
- +Standard-size HDMI port
- +Warranty listed
Cons
- −Power adapter not included
- −No touch on consoles or iPads
Hosyond 10.1" HDMI Touch Monitor
About this pick
The Hosyond is a 10.1-inch IPS panel at 1024 x 600 with a tempered glass capacitive touch surface and five-point touch. It includes dual speakers, a headphone jack, HDMI cables, USB power cables and a Raspberry Pi HDMI adapter.
It is aimed at makers: the listing names Raspberry Pi 5, 4 and 3B+, Banana Pi and BB Black, with Raspbian, Kali Linux and Ubuntu, and also Windows 7, 8 and 10 for the five-point touch. No driver is needed.
Compared with the VIEWMEI it ships with the Pi adapter and a stand, and it has a lower pixel count than 1280 x 800. Pick it for a Pi desk build or a console monitor where an adapter in the box saves a trip to the shop.
Best for: Raspberry Pi desk builds and small kiosks
Check price on AmazonPros
- +Pi adapter in the box
- +Tempered glass touch panel
- +Dual speakers and headphone jack
- +No driver needed
Cons
- −Lower 1024 x 600 resolution
- −Five-point touch only
VIEWMEI 10.1" HDMI Touch Monitor
About this pick
The VIEWMEI 10.1-inch has a 1280 x 800 IPS panel, 10-point touch on Windows 11, 10, 8 and 7, and single-point touch on Raspberry Pi OS, Ubuntu, Kali Linux and Windows 10 IoT. It measures 245 x 167 x 21 mm and weighs 520 g, and four mounting holes on the back allow wall or board mounting.
The seller says it connects by HDMI for video and USB for power, so confirm which USB lead also carries the touch data before you buy a cable. It is sharper than the Hosyond but lists no adapter or speakers in its summary.
It suits a compact PC desk or a camera monitor where 10-point touch on Windows matters and Pi single-touch is enough. The shell is ABS plastic, which is lighter and less robust than aluminium.
Best for: compact PC desks and mounted camera or CCTV panels
Check price on AmazonPros
- +Higher resolution than Hosyond
- +10-point touch on Windows
- +Light at 520 g
- +Mounting holes on the back
Cons
- −ABS plastic shell
- −Power and touch USB note is brief
ELECROW 7" HDMI Touchscreen Monitor
About this pick
The ELECROW is a 7-inch 1024 x 600 IPS panel with a 178 degree viewing angle, accepting up to 1080p input scaled to the panel. It gives 5-point touch on Windows 11, 10, 8 and 7 and single-touch on Raspberry Pi and Jetson Nano, and needs no driver.
Rear mounting holes let you bolt a Raspberry Pi directly to the back, and an acrylic stand is included for desktop use. It also has a headphone jack and an OSD menu for brightness and contrast.
It is the smallest and cheapest pick, built for embedded and desk-corner jobs such as a clock, dashboard or Pi controller. It is not a laptop second screen, so only buy it if 7 inches is what you want.
Best for: embedded builds and tiny desk dashboards
Check price on AmazonPros
- +Lowest cost here
- +Bolts onto a Raspberry Pi
- +Acrylic stand included
- +OSD menu and headphone jack
Cons
- −Only 7 inches
- −Too small for a laptop screen
How We Evaluated These HDMI Touchscreen Portable Monitors
Each pick was assessed across 5 criteria weighted for real-world use.
Touch signal path
Each listing was read for the USB lead that carries touch when video arrives over HDMI.
Size and resolution
We compared stated diagonal, pixel count and aspect ratio against typical use.
System support
Windows, macOS, Raspberry Pi and console touch statements were noted, including stated exclusions.
Mounting and ports
VESA holes, USB hubs, adapters and stands were weighed for fixed and portable use.
Value for the price
Package contents and warranty were scored against the price bucket.
How to Choose the Right HDMI Touchscreen Portable Monitors
By Screen Size
HDMI touch monitors range from a 7-inch controller panel to a 15.6-inch second screen.
| Your situation | Pick from this guide |
|---|---|
| Tiny controller or clock | ELECROW 7" HDMI Touchscreen Monitor |
| Pi or kiosk, 10 inches | Hosyond 10.1" or VIEWMEI 10.1" |
| Laptop second screen, 13 inches | MAFNKOU 13.3" Touchscreen Portable Monitor |
| Workbench screen with USB ports | JUNEBOX 13.3" HDMI Touchscreen Monitor |
| Large HDMI-only screen | InnoView 15.6" HDMI Touchscreen Monitor |
By Budget
| Budget | Pick from this guide |
|---|---|
| Under $50 | ELECROW 7" for embedded builds |
| $50 to $100 | MAFNKOU 13.3" for laptops, Hosyond or VIEWMEI for 10 inches |
| $100 to $150 | JUNEBOX 13.3" for hub ports, InnoView 15.6" for size |
HDMI Plus USB-A vs USB-C for Touch
Touch over HDMI always adds a separate USB path.
HDMI plus USB
The JUNEBOX uses a USB-B cable for touch, the MAFNKOU asks for an extra USB connection, and the InnoView needs a USB-A to USB-C lead plus power. This works with any HDMI source but means two cables.
USB-C single cable
The MAFNKOU and InnoView can carry video, power and touch on one full-function USB-C cable when the laptop port supports DP Alt Mode or Thunderbolt.
Most buyers should use USB-C when the laptop allows it and keep HDMI as a fallback.
By Source Device
| Your source | Pick from this guide |
|---|---|
| Raspberry Pi 5 or 4 | Hosyond 10.1" with the included adapter |
| Jetson Nano or Pi board | ELECROW 7" with rear mounting holes |
| Windows mini PC | VIEWMEI 10.1" with 10-point Windows touch |
| Console, no touch needed | InnoView 15.6" for video only |
For Makers and Kiosks Specifically
Look for
Rear mounting holes, no driver requirement, and a touch statement for Raspberry Pi OS, which is usually single-point.
In this comparison
The ELECROW offers rear holes to bolt a Raspberry Pi on, and the VIEWMEI lists four mounting holes and single-point touch on Raspberry Pi OS.
When to Spend More
Spend more if
You need a work screen with ports: the JUNEBOX adds four USB-A ports and VESA mounting, and the InnoView adds size and an 18-month warranty.
Save if
You just need a small touch panel: the ELECROW costs least and the Hosyond adds speakers for a small step up.
Frequently Asked Questions
Does an HDMI touchscreen monitor need a USB cable?
Yes. HDMI carries video only, so touch needs a separate USB cable. The JUNEBOX uses USB-B, the MAFNKOU asks for an extra USB connection and the InnoView needs a USB-A to USB-C lead.
Why does my touch screen work as a monitor but not as a touch device?
The USB touch cable is missing or in the wrong port, or the computer does not support touch on that screen. Console and iPad connections often do not pass touch at all.
Can I use these with a Raspberry Pi?
Yes, the Hosyond, VIEWMEI and ELECROW list Raspberry Pi support, usually with single-point touch on Pi OS. The Hosyond even includes an adapter.
Is a 7 inch touch monitor large enough?
It is enough for a dashboard, clock or controller, but not for documents. For a laptop second screen choose 13 inches or more.
Will touch work on a Mac over HDMI?
The MAFNKOU lists macOS touch, but only with the added USB connection. Check each listing's operating system line.
Can I mount these on a wall or arm?
The JUNEBOX has a 75 x 75 mm VESA interface, and the VIEWMEI and ELECROW list rear mounting holes. Confirm the hole spacing before buying a bracket.
Bottom Line
best overall: JUNEBOX 13.3" HDMI Touchscreen Monitor - best hub-style touch pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →