Amazon affiliate links - we earn a commission.Affiliate disclosure
Buying Guideยท9 min readยทUpdated July 2026

4 Best 5V USB PoE Splitters in 2026

We compared 5V USB PoE splitters by connector type and amperage, since Micro USB, USB-A, and Gigabit-rated models deliver different device compatibility.

Jamie Cole, Lead Product Researcher
4 options evaluated
Quick note: We may earn a commission when you buy through Amazon links. This guide is based on product specs, buyer feedback, use cases, and comparison criteria, not paid placement. Affiliate disclosure.
DeskFinds desk setup with docking station
Amazon Prime

New to Amazon Prime?

Try Prime Free
Best 5V USB PoE Splitters

At a Glance

Gigabit Micro USB PoE Splitter 5V 3A (USB0503G)
Best Overall

Gigabit Micro USB PoE Splitter 5V 3A (USB0503G)

โ†“ See why we picked it
Check price
UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter
Best for Raspberry Pi and Tablets

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter

โ†“ See why we picked it
Check price
ANVISION 4-Pack Active 5V 2.4A PoE Splitter Adapter
Best Value Multi-Pack

ANVISION 4-Pack Active 5V 2.4A PoE Splitter Adapter

โ†“ See why we picked it
Check price

A 5V USB PoE splitter converts standard PoE into the same 5V power that phones, tablets, Raspberry Pi boards, and streaming devices charge from, but the exact connector type and amperage vary enough that matching the right splitter to your specific device matters.

We compared this lineup on connector type, amperage, and speed, since one listing specifically delivers Gigabit speed at 3A while another uses a USB-A female port instead of the more common Micro USB, each fitting a genuinely different set of devices.

5 Criteria to Look For Before Buying a 5V USB PoE Splitter

Key buying criteria so you get the right fit the first time.

Micro USB and USB-A Connectors Are Not Interchangeable, So Matching the Exact Port Type Matters

Three picks in this comparison use a Micro USB connector while the fourth specifically uses a USB-A female port, two genuinely different physical connector types that determine which devices a splitter can actually power, since a Fire TV Stick's USB-A power plug won't fit a Micro USB splitter's output regardless of matching voltage and amperage. This matters significantly since buying the wrong connector type means the splitter simply won't physically connect to your device. Verify your specific device's exact charging port type (Micro USB versus USB-A) before purchasing a 5V splitter, rather than assuming any 5V splitter works with any 5V device.

Gigabit Speed Provides Real Benefit Specifically for Newer, Network-Intensive Devices Like a Raspberry Pi 4

The Gigabit Micro USB pick specifically supports full 1000Mbps data alongside its 5V/3A power output, a genuine benefit for a Raspberry Pi 4 or similar board running network-intensive applications that can exceed the 100Mbps ceiling of the standard splitters in this comparison. This matters if your specific device and use case can actually utilize bandwidth beyond 100Mbps, and matters much less for a basic Raspberry Pi 2/3 or simple streaming device that doesn't need that extra throughput. Check whether your specific device and application genuinely benefit from Gigabit speed before paying the modest premium over a standard 100Mbps splitter.

A Splitter's USB Port May Be Power-Only and Not Support Actual Data Transfer Through That Connection

The USB-A pick specifically clarifies it's not suitable for devices requiring USB data transfer like a mouse or keyboard, since its USB-A port delivers only power, not the USB data protocol those peripherals need to function. This matters if you were considering using a PoE splitter's USB output to also transmit data to a peripheral device, which won't work regardless of the splitter's power specifications, and matters less if you only need power delivery to your device (the actual network data still flows via a separate Ethernet connection on the device itself). Confirm whether your specific use case only requires power delivery through the USB port, since these splitters' USB connections are typically power-only, not data-capable.

A Documented Range Beyond the Standard 100m Limit Can Be a Genuine Differentiator for Longer Cable Runs

The UCTRONICS Micro USB pick specifically states a range up to 492ft (150m), meaningfully longer than the standard 328ft (100m) limit most PoE splitters document, giving real flexibility for a device positioned farther from the PoE source than typical. This matters if your specific installation requires reaching a device beyond the standard 100m cable limit, and matters less if your device sits comfortably within that standard range. Check a splitter's specifically documented maximum range if your installation distance is close to or exceeds the standard 100m PoE limit.

Multi-Pack Pricing Delivers Real Per-Unit Savings Only When You Actually Need That Many Splitters

The ANVISION 4-pack works out to roughly $7.25 per unit, a meaningfully lower cost per splitter than buying four single-unit UCTRONICS or Gigabit picks separately, but only delivers real value if you genuinely need to convert four separate devices at once. This matters if you're deploying multiple Raspberry Pi units, cameras, or similar devices simultaneously, where the per-unit savings add up, and matters less if you only need one splitter, where the single-unit picks avoid paying for three splitters you won't use. Calculate the actual number of devices you need to convert before choosing between a multi-pack and single-unit purchase.

4 Best 5V USB PoE Splitters in 2026

Best Overall

Gigabit Micro USB PoE Splitter 5V 3A (USB0503G)

Gigabit Micro USB PoE Splitter 5V 3A (USB0503G)
5V/3A Micro USB, Gigabit 10/100/1000Mbps1500V isolation, short-circuit, overvoltage protection44-57V PoE input, IEEE 802.3af/at

About this pick

This splitter's listing specifically states full Gigabit 10/100/1000Mbps data transmission alongside 5V/3A Micro USB power output, a higher amperage and faster speed combination than the standard 2.4A, 100Mbps splitters common in this category. Its 1500V high voltage isolation circuit protection is a genuinely detailed electrical safety specification.

Compared to the UCTRONICS and ANVISION picks below, this one's Gigabit speed support makes it the strongest choice for a Raspberry Pi 4 or similar device running network-intensive applications that benefit from more than 100Mbps.

Best for buyers who want Gigabit speed with higher 3A amperage for a Raspberry Pi 4 or similar device.

Best for: buyers who want Gigabit speed with higher amperage for a Raspberry Pi 4 or similar device

Check price on Amazon

Pros

  • +Gigabit speed supports network-intensive Raspberry Pi 4 applications
  • +Higher 3A amperage than the standard 2.4A splitters
  • +1500V high voltage isolation for detailed electrical protection

Cons

  • โˆ’Micro USB port is power-charging only, not for data transfer
  • โˆ’Higher price than the basic UCTRONICS single-pack pick below
Best for Raspberry Pi and Tablets

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter
5V 2.4A Micro USB, up to 492ft (150m) range44-57V DC compatible, overvoltage protectionIEEE 802.3af compliant, single unit

About this pick

This splitter's listing specifically states 12W of Micro USB power delivered up to 328-492ft (100-150m) via Ethernet cable, a genuinely longer documented range than the standard 100m limit found on most PoE splitters. Its 5V 2.4A output with overvoltage protection targets Android tablets, Dropcam, and Raspberry Pi 2/3B+ specifically.

Compared to the Gigabit pick above, this one's lower price makes it a straightforward choice for buyers whose Raspberry Pi or tablet doesn't need Gigabit speed, and the listing specifically notes a Gigabit-compatible model (U515902) is available separately if needed.

Best for buyers who want a straightforward, lower-priced Micro USB splitter for a Raspberry Pi 2/3B+ or tablet.

Best for: buyers who want a straightforward, lower-priced Micro USB splitter for Raspberry Pi or tablets

Check price on Amazon

Pros

  • +Documented range up to 492ft, longer than the standard 100m limit
  • +Lower price than the Gigabit pick for non-Gigabit needs
  • +Specifically named compatibility with Raspberry Pi 2/3B+ and tablets

Cons

  • โˆ’100Mbps speed only, not Gigabit
  • โˆ’Single unit only, not a multi-pack like the ANVISION pick
Best Value Multi-Pack

ANVISION 4-Pack Active 5V 2.4A PoE Splitter Adapter

ANVISION 4-Pack Active 5V 2.4A PoE Splitter Adapter
5V 2.4A Micro USB, 12W max, 4-packIEEE 802.3af compliant, 100Mbps44-56V input from PoE switch or injector

About this pick

This adapter's listing specifically confirms a 4-pack format at DC 5V 2.4A (12W max) output with full IEEE 802.3af compliance, delivering genuine per-unit value for buyers converting multiple Dropcam, Raspberry Pi, or IP camera devices at once. Its Micro USB jack matches the same connector type as the UCTRONICS pick above.

Compared to the single-unit picks in this comparison, this one's 4-pack pricing works out to roughly $7.25 per unit, a meaningfully lower per-device cost for a multi-device deployment than buying four single units separately.

Best for buyers converting multiple Micro USB devices at once who want the best per-unit value.

Best for: buyers converting multiple Micro USB devices at once who want the best per-unit value

Check price on Amazon

Pros

  • +4-pack delivers strong per-unit value for multiple devices
  • +Consistent Micro USB connector matches common Raspberry Pi and camera needs
  • +Full IEEE 802.3af compliance for standard PoE compatibility

Cons

  • โˆ’100Mbps speed only, not Gigabit
  • โˆ’Higher total price than single-unit picks if you only need one splitter
Best for USB-A Devices

Active PoE Splitter USB A 5V 2.4A

Active PoE Splitter USB A 5V 2.4A
5V 2.4A USB-A female output, 12W maxIEEE 802.3af/at, 44-57V input18-month warranty, 100m range

About this pick

This splitter's listing specifically names compatibility with Fire TV Stick, Roku, Echo Dot, baby monitors, and USB security cameras that charge via a standard USB-A female port, a genuinely different connector type than the Micro USB splitters in this comparison, while explicitly noting it's not suitable for devices requiring USB data transfer like a mouse or keyboard. Its 18-month warranty is the longest stated coverage among the picks in this comparison.

Compared to the Micro USB picks above, this one's USB-A female output specifically matches streaming sticks and smart speakers that use a standard USB-A power plug rather than Micro USB or USB-C.

Best for buyers powering a Fire TV Stick, Roku, Echo Dot, or other USB-A powered device.

Best for: buyers powering a Fire TV Stick, Roku, Echo Dot, or other USB-A powered device

Check price on Amazon

Pros

  • +USB-A connector matches Fire TV Stick, Roku, and Echo Dot power needs
  • +Longest stated warranty in this comparison at 18 months
  • +Explicit clarification on which device types it does and doesn't support

Cons

  • โˆ’Not suitable for devices requiring USB data transfer, power only
  • โˆ’100Mbps speed only, not Gigabit

How We Evaluated These 5V USB PoE Splitters

Each pick was assessed across 5 criteria weighted for real-world use.

Connector Type Match

Compared Micro USB, USB-A, and their fit with common 5V devices like Raspberry Pi and streaming sticks.

Real Amperage and Wattage

Compared documented current output from 2.4A to 3A across the picks.

Speed for Network-Intensive Devices

Compared Gigabit versus 100Mbps speed relevant to Raspberry Pi 4 and similar boards.

Pack Size and Per-Unit Value

Compared single-unit versus 4-pack pricing.

Warranty and Support

Compared stated warranty length across the picks.

How to Choose the Right 5V USB PoE Splitters

By Connector Type

Your device's charging portRecommended pick
Micro USB (Raspberry Pi 2/3, older tablets)UCTRONICS Micro USB Active PoE Splitter or Gigabit pick
USB-A (Fire TV Stick, Roku, Echo Dot)Active PoE Splitter USB A 5V 2.4A
Multiple Micro USB devices at onceANVISION 4-Pack Active PoE Splitter

By Budget

Price rangeRecommended pick
Under $10Active PoE Splitter USB A ($9.99)
Under $11UCTRONICS Micro USB Splitter ($10.89)
Under $14Gigabit Micro USB PoE Splitter ($13.99)
Under $29ANVISION 4-Pack ($28.98, ~$7.25 per unit)

Gigabit Speed vs Standard 100Mbps for Raspberry Pi

Gigabit speed (Gigabit Micro USB pick)

Delivers full 1000Mbps data alongside 3A power, the better fit for a Raspberry Pi 4 running network-intensive applications.

Standard 100Mbps (UCTRONICS, ANVISION)

Adequate for a Raspberry Pi 2/3 or basic streaming device that doesn't need Gigabit throughput.

If you're powering a Raspberry Pi 4 or a device running demanding network applications, the Gigabit pick's extra bandwidth and amperage are worth the modest price increase. For older Pi models or simple devices, the standard-speed picks perform just as well for less.

By Device Count

Number of devices to powerRecommended pick
Just one deviceUCTRONICS, Gigabit pick, or USB-A pick depending on connector
Multiple Micro USB devicesANVISION 4-Pack Active PoE Splitter

For a Smart Home Device Cluster Specifically

Look for

The correct connector type for your specific smart home devices, since USB-A and Micro USB are not interchangeable, and confirm the splitter's amperage matches or exceeds your device's actual power draw.

In this comparison

The USB-A pick specifically names Fire TV Stick, Roku, and Echo Dot compatibility, common devices in a typical smart home entertainment setup.

When to Spend More

Spend more if

You're powering a Raspberry Pi 4 or another device that benefits from Gigabit speed and higher amperage, where the Gigabit Micro USB pick's $13.99 price is justified by that performance.

Save if

You're powering a single basic USB-A device like a streaming stick, where the USB-A pick delivers that for $9.99, the lowest price in this comparison.

Frequently Asked Questions

Can I use a Micro USB PoE splitter with a device that has a USB-A charging port?

No, Micro USB and USB-A are physically different connectors, so you need a splitter specifically matching your device's exact port type, like the USB-A pick in this comparison for Fire TV Stick, Roku, or Echo Dot devices.

What's the most common mistake buyers make when choosing a 5V USB PoE splitter?

Assuming any 5V splitter works with any 5V device regardless of connector type, when Micro USB and USB-A splitters are physically incompatible with devices using the other connector type.

Is the Gigabit Micro USB splitter worth the price over the basic UCTRONICS pick?

If you're powering a Raspberry Pi 4 or another device that benefits from Gigabit speed and higher 3A amperage, the Gigabit pick's price is justified, but for a Raspberry Pi 2/3 or basic tablet, the standard UCTRONICS pick delivers adequate performance for less.

Can I use a PoE splitter's USB port to transfer data to a peripheral like a keyboard?

No, the USB-A pick specifically clarifies its port is power-only, not suitable for devices requiring USB data transfer like a mouse or keyboard, so these splitters should only be used for power delivery to devices that already have their own network connection.

How far can I place my device from the PoE source using a 5V USB splitter?

Most splitters in this comparison support the standard 328ft (100m) PoE limit, though the UCTRONICS pick specifically documents an extended range up to 492ft (150m) for installations needing that extra reach.

Is the ANVISION 4-pack worth it if I only need one splitter right now?

If you only need one splitter currently, a single-unit pick like the UCTRONICS or Gigabit splitter avoids paying for three units you won't use immediately, though the ANVISION 4-pack is worth considering if you anticipate needing more splitters for future devices.

Bottom Line

best overall: Gigabit Micro USB PoE Splitter 5V 3A (USB0503G) - best overall pick in this roundup.

See the full rankings above for all picks with pros, cons, and best-for summaries.

Browse on Amazon

All Prime-eligible options with current pricing.

Shop on Amazon โ†’

Related Guides