4 Best PoE Splitters in 2026
We compared PoE splitters by real power delivery and pass-through, since one listing splits PoE into both 12V DC and a downstream PoE output.
New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free
At a Glance
IPCamPower Gigabit POE to 12V DC Converter with POE Pass Through
↓ See why we picked itA PoE splitter converts Power over Ethernet into standard DC voltage, letting you power a non-PoE device like a Wi-Fi access point or an IR illuminator from the same Ethernet cable feeding a nearby PoE camera, without running a separate power line.
We compared this lineup on real power delivery, safety protections, and pass-through capability, since one listing specifically splits incoming PoE into both a 12V DC output and a separate downstream PoE output, letting you power two devices from a single cable run.
5 Criteria to Look For Before Buying a PoE Splitter
Key buying criteria so you get the right fit the first time.
A PoE Splitter With Pass-Through Capability Solves a Genuinely Different Problem Than a Single-Output Splitter
The IPCamPower pick specifically splits incoming PoE into both a 12V DC output and a separate downstream PoE output, letting you power a camera and a separate 12V accessory like an IR illuminator from one cable, a fundamentally different capability than the single-output splitters in this comparison that only convert to DC without any pass-through. This matters significantly if your installation needs to power two separate devices near each other from one cable run, and matters less if you only have one non-PoE device to power. Check whether a splitter specifically offers pass-through or dual-output capability if you need to power more than one device from a single PoE source.
Comprehensive Electrical Protection Specifications Matter Even on an Inexpensive Splitter
The SICSOLINK pick specifically names overcurrent, short-circuit, overvoltage, and overpower protection built into its chip, a genuinely comprehensive safety feature set despite being the lowest-priced pick in this comparison, showing that low price doesn't have to mean reduced electrical safety. This matters if you're powering valuable connected equipment where an electrical fault could cause real damage, and matters less if you're powering an inexpensive, easily replaceable device. Check a splitter's specifically named protection features rather than assuming price alone indicates safety quality.
A Specifically Named Device Compatibility List Removes Real Guesswork Before Connecting Your Equipment
The PoE Texas pick specifically names compatible devices including Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, and Apexis, a genuinely specific compatibility disclosure that helps confirm your exact device will work before purchase, rather than a generic 'works with IP cameras' claim. This matters if you own one of these specifically named devices and want confidence before buying, and matters less if your device isn't on any listed compatibility list, where you'd need to verify voltage and connector specifications independently regardless. Check for a specifically named compatibility list matching your exact device model if you want that added purchase confidence.
Selectable Voltage Output Provides Flexibility for Buyers Who Aren't Certain Which Voltage Their Device Needs
The LINOVISION pick specifically offers selectable DC12V or DC24V output, letting the same physical splitter serve devices with different voltage requirements, unlike the fixed-12V-only picks in this comparison that only work with 12V devices. This matters if you're deploying the splitter across multiple device types with different voltage needs, or if you're not entirely certain of your specific device's exact voltage requirement, and matters less if you know you specifically need 12V and nothing else. Check whether a splitter offers selectable voltage output if you need flexibility across multiple device types or voltage uncertainty.
Metal Housing With DIN-Rail Mounting Serves Industrial Installation Contexts Differently Than a Compact Plastic Splitter
The LINOVISION pick's full metal housing with DIN-rail mounting compatibility targets industrial control cabinet installations, a different physical deployment context than the compact plastic-housed splitters in this comparison designed for simpler camera-adjacent placement. This matters if your installation involves a standardized industrial control cabinet with DIN-rail infrastructure, and matters less for a simple camera installation where a compact splitter mounted near the camera makes more practical sense. Match a splitter's physical mounting format to your actual installation context rather than assuming any splitter's form factor fits your specific deployment.
4 Best PoE Splitters in 2026
SICSOLINK Gigabit Active PoE Splitter, 48V to 12V
About this pick
This splitter's listing specifically states built-in overcurrent, short-circuit, overvoltage, and overpower protection through a premium chip, a genuinely comprehensive safety feature set at the lowest price in this comparison. Its full Gigabit 1000Mbps speed eliminates lag for smooth 4K surveillance video while converting 48V PoE to a stable 12V 2A output.
Compared to the IPCamPower and PoE Texas picks below, this one's specifically stated input voltage range from 44V to 57V with built-in overvoltage protection gives it real flexibility across slightly varying PoE source voltages.
Best for buyers who want comprehensive electrical protection and full Gigabit speed at the lowest price in this comparison.
Best for: buyers who want comprehensive electrical protection and full Gigabit speed at the lowest price
Check price on AmazonPros
- +Lowest price in this comparison at $9.98
- +Comprehensive multi-safety protection built into the chip
- +Full Gigabit speed supports smooth 4K surveillance video
Cons
- −No PoE pass-through, only converts to 12V DC output
- −Compact plastic housing, less rugged than the metal LINOVISION pick
IPCamPower Gigabit POE to 12V DC Converter with POE Pass Through
About this pick
This splitter's listing specifically describes a dual-function design that converts incoming PoE to a 12V DC output while also passing through a separate PoE output, letting you power both an IP camera and an additional 12V DC device like an IR illuminator or siren from a single cable run. Its PoE output also functions as a network extender, reaching an additional 328ft to a downstream PoE device.
Compared to the SICSOLINK pick above, this one's unique dual-output design accepts up to 30W of active PoE input and can share up to 27W between its PoE output and 12V DC output, a genuinely more versatile power-sharing architecture.
Best for buyers who need to power both a PoE camera and a separate 12V DC accessory from one cable.
Best for: buyers who need to power both a PoE camera and a separate 12V DC accessory from one cable
Check price on AmazonPros
- +Uniquely powers both a 12V device and a downstream PoE device simultaneously
- +PoE output doubles as a network extender for additional reach
- +Versatile for accessories like IR illuminators, sirens, and strobes
Cons
- −Highest price in this comparison at $29.99
- −Designed for indoor use only, unlike the outdoor-capable picks
PoE Texas 802.3af 12V PoE Splitter
About this pick
This splitter's listing specifically states compatibility with a named list of non-PoE devices including Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, and Apexis cameras, a genuinely specific compatibility disclosure the other picks in this comparison don't provide. Its Mode A/B design works with any 802.3af PoE switch or 48V PoE injector to deliver 12 continuous watts.
Compared to the SICSOLINK and IPCamPower picks above, this one's direct phone support line (512 479 0317) alongside a 30-day no-questions-asked return policy gives buyers a genuinely accessible support channel beyond email or online tickets.
Best for buyers who want a specifically named compatible device list and direct phone support.
Best for: buyers who want a specifically named compatible device list and direct phone support
Check price on AmazonPros
- +Specifically named compatibility list removes guesswork
- +Direct phone support line for immediate help
- +30-day no-questions-asked return policy
Cons
- −Lower 12W output than the SICSOLINK pick's 24W
- −No PoE pass-through like the IPCamPower pick
LINOVISION Industrial 30W Gigabit PoE Splitter
About this pick
This splitter's listing specifically states a full metal design supporting both DIN-rail and wall-mount installation, a genuinely more industrial build than the plastic-housed picks in this comparison. Its selectable DC12V or DC24V output covers a broader range of non-PoE devices, and an optional passive PoE output mode specifically supports wireless APs and bridges.
Compared to the SICSOLINK, IPCamPower, and PoE Texas picks above, this one's 30W power delivery and dual voltage selection target industrial control cabinet and wireless bridge deployments needing more power and installation flexibility than a basic camera splitter.
Best for buyers who want an industrial metal build with selectable 12V/24V output and DIN-rail mounting.
Best for: buyers who want an industrial metal build with selectable 12V/24V output
Check price on AmazonPros
- +Full metal housing suits industrial control cabinet installations
- +Selectable 12V or 24V output covers more device types
- +DIN-rail mounting adds genuine installation flexibility
Cons
- −Highest price in this comparison at $49.00
- −Passive PoE output mode is explicitly not recommended for regular devices
How We Evaluated These PoE Splitters
Each pick was assessed across 5 criteria weighted for real-world use.
Real Power Delivery and Output Voltage
Compared documented wattage and voltage output options across the picks.
Pass-Through and Multi-Device Capability
Compared whether each splitter can power an additional downstream device alongside its DC output.
Electrical Safety Protection
Compared overcurrent, overvoltage, and short-circuit protection disclosures.
Build Quality and Installation Flexibility
Compared plastic versus metal housing and mounting options.
Support and Compatibility Documentation
Compared named device compatibility lists and support channel accessibility.
How to Choose the Right PoE Splitters
By Primary Need
| If you mainly need | Recommended pick |
|---|---|
| Comprehensive protection at the lowest price | SICSOLINK Gigabit Active PoE Splitter |
| To power a camera plus a separate 12V accessory | IPCamPower Gigabit POE to 12V DC Converter |
| A named compatibility list and phone support | PoE Texas 802.3af 12V PoE Splitter |
| An industrial metal build with 12V/24V selection | LINOVISION Industrial 30W Gigabit PoE Splitter |
By Budget
| Price range | Recommended pick |
|---|---|
| Under $10 | SICSOLINK Gigabit Active PoE Splitter ($9.98) |
| Under $18 | PoE Texas 802.3af 12V PoE Splitter ($17.99) |
| Under $30 | IPCamPower POE to 12V DC Converter ($29.99) |
| Under $50 | LINOVISION Industrial 30W Splitter ($49.00) |
Single-Output Simplicity vs Dual-Output Versatility
Single-output simplicity (SICSOLINK, PoE Texas)
Both convert PoE to a single 12V DC output, straightforward for powering one non-PoE device like a camera.
Dual-output versatility (IPCamPower)
Splits PoE into both a 12V DC output and a downstream PoE output, letting you power two separate devices from one cable run.
If you only need to power one non-PoE device, the simpler single-output picks are more cost-effective. If you want to power both a camera and a separate 12V accessory like an IR illuminator, the IPCamPower's dual-output design is worth the higher price.
By Output Voltage Need
| Your device's voltage need | Recommended pick |
|---|---|
| Fixed 12V output | SICSOLINK, IPCamPower, or PoE Texas |
| Selectable 12V or 24V output | LINOVISION Industrial 30W Gigabit PoE Splitter |
| Passive PoE output for a wireless bridge | LINOVISION Industrial 30W Gigabit PoE Splitter |
For a Camera Plus Accessory Setup Specifically
Look for
A splitter with genuine dual-output capability, powering both the camera's DC input and a separate accessory like an illuminator, rather than a single-output splitter you'd need to double up on.
In this comparison
The IPCamPower pick is specifically designed for exactly this dual-device scenario, sharing power between a 12V output and a PoE pass-through output.
When to Spend More
Spend more if
You want an industrial metal build with selectable 12V/24V output for a control cabinet or wireless bridge deployment, where the LINOVISION pick's $49.00 price is justified by that flexibility.
Save if
You just need to convert PoE to 12V for a single camera, where the SICSOLINK pick delivers that for $9.98, the lowest price in this comparison.
Frequently Asked Questions
Can a PoE splitter power both a camera and a separate accessory like a light or siren?
Only the IPCamPower pick in this comparison specifically offers this dual-output capability, splitting incoming PoE into both a 12V DC output and a downstream PoE output, letting you power two devices from one cable run.
What's the most common mistake buyers make when choosing a PoE splitter?
Assuming any PoE splitter provides pass-through or multi-device capability, when most splitters, including three of the four picks in this comparison, only provide a single DC output without any additional pass-through function.
Is the LINOVISION splitter worth the higher price over the SICSOLINK pick?
If you specifically need an industrial metal build with selectable 12V/24V output for a control cabinet or wireless bridge deployment, the LINOVISION's higher price is justified, but for a basic camera installation, the SICSOLINK pick delivers comparable core function for much less.
How do I know if a PoE splitter is compatible with my specific camera model?
Checking a listing's specifically named compatible device list, like the PoE Texas pick's list including Foscam, Wansview, and other named brands, or verifying your camera's exact voltage and connector requirements against the splitter's specifications, is the reliable way to confirm compatibility.
Can I extend my PoE network distance using a PoE splitter?
The IPCamPower pick specifically states its PoE pass-through output also functions as a network extender, reaching an additional 328ft to a downstream device, a dual-purpose capability the single-output splitters in this comparison don't offer.
Do I need a metal-housed splitter for an outdoor installation?
The LINOVISION pick's metal housing suits industrial and outdoor enclosure deployments, though checking a specific splitter's stated indoor/outdoor rating, like the IPCamPower pick's explicit indoor-only designation, is important before installing any splitter outdoors.
Bottom Line
best overall: SICSOLINK Gigabit Active PoE Splitter, 48V to 12V - best overall pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →