8 Best Mini PC Mounts in 2026
8 Mini PC mounts we compared across under-desk, behind-monitor, and wall mounting, with honest notes on weight limits and airflow clearance.
Comparison Table
| Pick | Product | |
|---|---|---|
| Best Overall Pick | Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) | Check price |
| Best for Heavier Combined Loads | HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, Under Desk | Check price |
| Best Warranty | VIVO Adjustable Thin Client Mini PC Mount Bracket | Check price |
| Best for Open-Frame Airflow | suptek Thin Client Mount Bracket Adjustable Mini PC Mount | Check price |
| Best Budget Wall or VESA Pick | Monzlteck Adjustable Small Device Wall Mount or VESA Mount Behind the Monitor | Check price |
| Best Under-Desk Height Adjustment | Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable | Check price |
| Best Budget Under-Desk Pick | bylitco Under Desk Laptop/Mini PC Storage Mount | Check price |
| Best Heavy-Duty Under-Desk Pick | PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder | Check price |
Prices are approximate. Check Amazon for current pricing before purchasing.
A Mini PC mount only earns its keep if it solves the problem it was bought for: getting a small computer off the desk without blocking its vents, overloading the surface it attaches to, or making the ports impossible to reach. Before comparing individual products, it helps to separate mounting method from mounting hardware, because a mount rated for under-desk use is not automatically a good wall mount, and a VESA-only bracket cannot substitute for a stud-anchored wall plate.
This guide covers the full mounting category: behind-monitor, under-desk, and wall-mounted options side by side. If you already know you want VESA-specific hardware or a wall-only setup, our narrower guides on VESA mounts and wall mounts dig deeper into those two methods specifically, while this guide is the place to start if you are still deciding which mounting location fits your desk.
5 Criteria to Look For Before Buying a Mini PC Mount
Key buying criteria so you get the right fit the first time.
Mounting method scope
Confirm the mount actually supports the location you need, behind-monitor, under-desk, or wall, rather than assuming a generic 'universal mount' claim covers your exact setup. Some brackets genuinely support all three; others are under-desk only despite similar marketing language.
Realistic load capacity vs your Mini PC's weight
Most Mini PCs weigh 1 to 3 pounds, well under any mount's rated capacity, but a docking station, NAS enclosure, or piggybacked monitor changes the math. Check whether the listing's weight rating covers the device alone or the combined load.
Mounted airflow clearance
A mount that traps a Mini PC's exhaust against a solid plate or an enclosed cubby can undo the airflow benefits of getting it off the desk in the first place. Favor open-frame designs, especially for a Mini PC that runs sustained workloads.
Port access while mounted
A mount that looks tidy but buries the port side against a wall or desk underside becomes a hassle every time you need to plug in a new cable. Check the listing's photos for how ports face once installed.
Genuinely distinct mounting locations
Behind-monitor, under-desk, and wall mounting are not interchangeable use cases. A wall mount needs anchor strength consideration a desk mount does not, and a behind-monitor mount needs to respect the monitor's own weight rating in a way an under-desk mount never has to.
8 Best Mini PC Mounts in 2026
Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm)
About this pick
This bracket covers all three mounting locations in one product: wall, under desk, or behind the monitor via VESA or a monitor arm. It fits device widths from 0.63 to 2.8 inches and supports up to 12 pounds, which covers the vast majority of NUC-style, Mac mini, and thin client Mini PCs.
Built-in cable management and a small pen holder are a nice touch for a desk that already has enough clutter, and the open design is stated not to cover the vents or ports of the mounted Mini PC. Because it adjusts to fit a wide device range, double-check your exact Mini PC's width against the 0.63 to 2.8 inch spec before ordering.
Best for: Buyers who have not yet decided between wall, under-desk, or behind-monitor and want one mount that can do any of the three.
Check price on AmazonPros
- +Genuinely covers three different mounting locations
- +12 lb capacity fits nearly all Mini PCs
- +Cable management keeps the mounted PC's wiring tidy
- +Open design avoids covering vents or ports
Cons
- −12 lb limit still needs checking against your specific Mini PC and any attached dock
- −Wall mounting hardware is generic, not stud-specific
- −No documented long-term vibration test for the monitor arm mounting mode
HumanCentric Thin Client Mount Bracket Mini PC VESA Monitor Arm, Under Desk
About this pick
This bracket supports devices up to 0.65 to 2.55 inches deep and rates the mount itself for up to 11 pounds of Mini PC weight, or 18 pounds combined if a monitor is also riding on the same VESA point. That combined figure matters more than most listings admit, since a Mini PC piggybacking on a monitor's own VESA mount adds its weight to whatever that monitor arm already carries.
The kit includes hardware for all three mounting locations along with silicone scratch strips and an illustrated manual, so setup does not require guessing which screws go where. Reviewers who mount a heavier docking station alongside their Mini PC should check the combined weight rating carefully rather than assuming the 11 lb device limit is the only number that matters.
Best for: Buyers piggybacking a Mini PC on an existing monitor's VESA point who need a mount that actually publishes a combined weight figure.
Check price on AmazonPros
- +Publishes a combined weight rating, not just a device-only number
- +Fits three mounting locations with one hardware kit
- +Silicone strips protect the device from scratches
- +No-questions-asked support policy stated in the listing
Cons
- −Higher price than several similar mounts here
- −Combined 18 lb rating still requires checking your monitor arm's own limit separately
- −Side-mounted power button requirement excludes some NUC models
VIVO Adjustable Thin Client Mini PC Mount Bracket
About this pick
VIVO's bracket adjusts from 1.8 to 7.1 centimeters of width and is rated for up to 5 kilograms, or about 11 pounds, on solid steel construction with a powder coated rust-resistant finish. It covers the same three mounting locations as the pricier options here: behind the monitor, clamped to a monitor arm pole, or installed under the desk.
What sets it apart is a 3-year manufacturer warranty, longer than most mounts in this category typically offer, plus an open-frame design that leaves ports and vents fully exposed for airflow and cable access. Adjustable straps and rubber pads keep the device from sliding once mounted.
Best for: Buyers who want a dependable, average-capacity mount backed by a longer warranty than most competitors offer.
Check price on AmazonPros
- +3-year warranty is longer than most comparable mounts
- +Open-frame design keeps vents and ports accessible
- +Steel build with rust-resistant coating
- +Fits a wide range of thin clients and Mini PC brands
Cons
- −11 lb capacity is average for the category, not class-leading
- −Pole clamp diameter range (3 to 4.1cm) will not fit every monitor arm pole
- −No cable management feature built in
suptek Thin Client Mount Bracket Adjustable Mini PC Mount
About this pick
This bracket adjusts from 0.6 to 2.7 inches of width and is built from solid steel rated to support up to 11 pounds, with a rust-proof coating and adjustable shoulder straps to keep the device from sliding once mounted. The listing specifically calls out an open-frame design meant to reduce thermal throttling by letting air pass through the mounted device rather than trapping it against a solid backing plate.
Three mounting options are supported: behind the monitor, clamped to a pole, or under the desk, all using the same hardware kit. Rubber pads protect the Mini PC's housing from scratches during and after installation.
Best for: Buyers whose main worry is trapped heat behind a monitor and want a mount built around keeping air moving.
Check price on AmazonPros
- +Explicitly designed around airflow, not just device holding
- +11 lb capacity covers most Mini PCs
- +Rubber pads prevent scratching during mounting
- +24/7 support stated in the listing
Cons
- −Same 11 lb ceiling as several other mounts here, not a heavy-duty option
- −Open-frame design offers less physical protection than an enclosed bracket
- −Strap-based retention needs periodic tightness checks over time
Monzlteck Adjustable Small Device Wall Mount or VESA Mount Behind the Monitor
About this pick
This is a general-purpose wall or behind-monitor mount for any device under 2.8 inches thick, built from steel with anti-scratch EVA pads inside the bracket. Installation is a two-screw affair into either a wall or the underside of a desk, and the listing specifies the desk surface must be at least 0.75 inches thick to anchor securely.
At this price it does not include the extra features found on some other picks, like cable management channels or a pen holder, but it covers the core job of holding a small device in place on a wall, under a desk, or behind a TV. Drywall anchors are included in the box, though a stud is the more reliable anchor point for anything you plan to leave mounted long-term.
Best for: Budget-focused buyers who want a straightforward wall or under-desk mount without extra features they will not use.
Check price on AmazonPros
- +Lowest price point among the wall-capable mounts here
- +Simple two-screw installation
- +EVA pads protect the device from scratches
- +Works on a wall, under a desk, or behind a TV
Cons
- −No cable management or pen holder extras
- −Included drywall anchors are a weaker anchor point than a stud for heavier setups
- −No stated weight capacity figure in the listing, unusual for this category
Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable
About this pick
Unlike the multi-location mounts above, this bracket is purpose-built for under-desk use only, with 5 levels of height adjustment spanning 1.8 to 3.3 inches. Width-adjustable side brackets fit Mac mini, Intel NUC, Xbox, and other small form factor devices, and the listing notes the range is meant to optimize both airflow clearance and how easily you can reach the ports.
The reinforced steel frame is built to avoid sagging over time, a detail worth caring about since under-desk mounts carry their load in a less visually obvious spot than a wall or behind-monitor mount. A full installation kit with a positioning template is included, which speeds up getting the screw holes right on the first try.
Best for: Buyers who have already decided on under-desk mounting and want fine-grained height control for airflow and reach.
Check price on AmazonPros
- +5 height levels give real flexibility for airflow and port access
- +Reinforced steel avoids sagging under sustained load
- +Positioning template speeds up installation
- +Fits a wide range of small form factor devices
Cons
- −Under-desk only, no wall or behind-monitor option
- −No stated maximum weight capacity in the listing
- −Height range tops out at 3.3", too shallow for some thicker Mini PC and dock combos
bylitco Under Desk Laptop/Mini PC Storage Mount
About this pick
This is the simplest and least expensive mount in this guide, a fixed under-desk tray for devices less than 1.85 inches thick with soft padding to prevent scratches. Six screws anchor it to the underside of a desk at least 0.78 inches thick, and a mounting template is included to speed up drilling.
Without height or width adjustment, it is a good fit for a single known device rather than a mount you expect to reuse across different Mini PCs later. Because it is fixed rather than adjustable, measure your specific Mini PC's thickness against the 1.85 inch limit before ordering.
Best for: Buyers on a tight budget who know their exact Mini PC's dimensions and want a simple fixed under-desk tray.
Check price on AmazonPros
- +Lowest price in this guide
- +Simple, fixed design with no adjustment to fuss with
- +Soft padding protects the device
- +Mounting template makes drilling straightforward
Cons
- −No height or width adjustment
- −1.85" thickness limit is the tightest in this guide
- −No stated weight capacity
PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder
About this pick
This under-desk mount is rated to hold up to 22 pounds, well above the 11 to 12 pound ceiling of most brackets in this guide, which makes it a better fit for a Mini PC paired with a NAS enclosure or a heavier dock. Nine levels of height adjustment span 4.2 to 8 inches, a wider range than most competitors, for both airflow and easy port access.
Steel construction backs up the higher weight rating, and a full installation kit with a positioning template is included. Because it is under-desk only, buyers who also want a wall or behind-monitor option should look elsewhere in this guide.
Best for: Buyers mounting a Mini PC alongside a NAS or heavier accessory who need real headroom above the typical 11 lb bracket rating.
Check price on AmazonPros
- +22 lb capacity is the highest in this guide
- +9 height levels is more range than most competitors
- +Good fit for NAS or dock combinations, not just a bare Mini PC
- +Complete kit with positioning template included
Cons
- −Under-desk only, no wall or VESA option
- −Highest price point in this guide
- −Extra load capacity is unnecessary weight allowance for a bare, lightweight Mini PC
How We Evaluated These Mini PC Mounts
Each pick was assessed across 5 criteria weighted for real-world use.
Mounting method scope
We evaluated whether each mount genuinely supports the mounting locations it claims (behind-monitor, under-desk, wall) rather than listing every location a generic bracket happens to bolt onto.
Load capacity realism
We compared each mount's stated weight rating against typical Mini PC weights, and flagged listings that publish a combined device-plus-monitor figure versus those that only rate the bare device.
Airflow clearance when mounted
We looked at whether the mount's design, open-frame versus solid backing, keeps a mounted Mini PC's intake and exhaust clear rather than trapping heat against a plate.
Port access after mounting
We evaluated whether ports stay reachable once the device is mounted, since a Mini PC tucked under a desk or behind a monitor is only convenient if you are not fighting cable access every time you plug something in.
Genuine location fit
We treated behind-monitor, under-desk, and wall mounting as three real, different use cases rather than interchangeable marketing bullet points, and scored each mount on how well it actually serves its stated location.
How to Choose the Right Mini PC Mounts
Choose by Mounting Location
Behind-monitor, under-desk, and wall mounting solve different problems, even when the same bracket claims to support all three.
| Your priority | Recommended pick |
|---|---|
| Behind the monitor, piggybacking on VESA | Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) |
| Under-desk with fine height control | Under Desk Mini PC Mount Bracket, 5-Level Height Adjustable |
| Wall mounting on a budget | Monzlteck Adjustable Small Device Wall Mount |
| Heaviest combined load (Mini PC plus NAS or dock) | PUTORSEN Under Desk Mini PC Mount NAS Mount Bracket Holder |
Check Your Mini PC's Real Weight and Depth
| Device profile | What to check on the mount |
|---|---|
| Standard Mini PC alone (under 3 lbs) | Any mount here comfortably clears the weight limit |
| Mini PC plus a docking station or hub | Verify combined weight against the mount's rating, not just the bare device |
| Mini PC piggybacking on a monitor's VESA point | Use a mount that publishes a combined device-plus-monitor rating, like the HumanCentric bracket |
| Mini PC deeper than 2.8 inches | Most brackets in this guide will not fit; measure before buying |
Wall Mounting Reality Check
Drywall anchors alone are not a reliable long-term anchor point for anything with real leverage or repeated cable tension.
Drywall anchor only
Fine for very light devices with minimal cable pull, but not the strongest long-term anchor. A stud is more reliable whenever one is reachable at the mounting spot.
Stud-anchored
The more dependable option for anything you plan to leave mounted for years, since it avoids the slow pull-out failure drywall anchors are prone to under sustained load.
If your wall mount location does not line up with a stud, consider under-desk or behind-monitor mounting instead rather than forcing a drywall-only wall installation.
Verify Mounted Airflow Before You Commit
| Mounting style | Airflow risk |
|---|---|
| Open-frame bracket, straps only | Low risk, air can pass around the device on most sides |
| Solid backing plate with device pressed flat | Higher risk, especially in an enclosed corner or behind a monitor with little clearance |
| Under-desk in a tight, enclosed cubby | Check clearance on all sides, not just the mount's own design |
Setup and Long-Term Use
| Consideration | What to plan for |
|---|---|
| Cable routing | Pick a mount with built-in cable management if your setup already has a lot of cords |
| Reaching ports later | Under-desk mounts should leave the port side accessible without fully unmounting the device |
| Dust and cleaning | Open-frame mounts are easier to dust than fully enclosed brackets |
| Re-mounting a different device later | Adjustable-width brackets are more future-proof than fixed-size trays |
Frequently Asked Questions
Can any of these mounts go on a wall, under a desk, and behind a monitor?
A few, like the HumanCentric and VIVO brackets and the Adjustable Thin Client mount from this guide, genuinely support all three locations with one hardware kit. Others, like the PUTORSEN and 5-Level Height Adjustable brackets, are under-desk only despite being in the same general category.
Is a drywall anchor strong enough for a wall-mounted Mini PC?
It can hold a very light device for light use, but a stud is the more reliable anchor point for anything left mounted long-term, since drywall anchors are more prone to slow pull-out failure under sustained load or repeated cable tension.
Does a higher weight rating always mean a better mount?
Not for a bare Mini PC, since most only weigh 1 to 3 pounds and any mount here clears that easily. A higher rating matters only if you are adding a docking station, NAS enclosure, or piggybacking on a monitor's VESA point.
Will mounting my Mini PC make it run hotter?
Only if the mount traps its intake or exhaust against a solid surface or an enclosed space. Open-frame mounts with real clearance on multiple sides avoid this problem; a mount pressed into a tight under-desk cubby needs its own clearance check regardless of the bracket's design.
How is this guide different from the VESA mount and wall mount guides on this site?
This guide compares all three mounting methods side by side so you can decide which fits your desk first. Our VESA mount guide and wall mount guide each narrow into one specific method with more depth on that method's particular tradeoffs.
Bottom Line
best overall: Adjustable Thin Client Mini PC Mount Bracket (Wall, Under Desk, Monitor Arm) - best overall pick pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →