7 Best Foot Rests for Office Chairs in 2026
Seven foot rests that attach to an office chair or fit a stool base, compared by fit, height and distance range, caster locks and weight limits.
New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free
At a Glance
Most footrests sit on the floor and have to be nudged back into place each time you roll your chair. A footrest that mounts to the chair itself travels with you, which is the whole point, but it only works if your chair has the right center column and clearance underneath.
This list is built around that compatibility question. Three picks are padded ottoman attachments with casters, one is a flip-away telescopic frame and three are chrome foot rings meant for stools and task chairs. Comparing the listings, we looked at gas cylinder fit, height and distance range, cushion size, weight limit and price. Measure your chair base and gas column diameter before you spend anything.
6 Criteria to Look For Before Buying a Foot Rests for Office Chair
Key buying criteria so you get the right fit the first time.
Gas cylinder compatibility
Attachments clamp around the central gas cylinder of the chair, and a clamp that is too small or too large will not fit. Some listings state a 2 inch cylinder, and rings often mention a 2.1 inch center hole. Measure the cylinder diameter and check clearance around the base before ordering.
Height and distance range
Where the footrest sits matters more than its brand. Height from about 15 to 21 inches and distance from about 16 to 26 inches can cover many users. Check the ranges against your leg length and desk gap.
Cushion versus ring
A cushion gives soft support and a flat platform for the feet. A chrome ring is hard and meant for resting feet on a perch. Choose by how long you sit.
Casters and locks
Casters let the footrest move with you, but they should lock so it does not drift. BALAPET lists 2 locking casters and MOYRPV lists 5. Check for locking brakes.
Weight limit
VIVO states 242 lbs, while others do not. A stated limit matters for heavier users or cross-legged sitting. Look for a number.
Assembly and chair clearance
Assembly takes tools and time. Check that nothing on the chair base blocks the clamp. Read the compatibility note first.
7 Best Foot Rests for Office Chairs in 2026
BALAPET Office Chair Footrest Attachment
About this pick
BALAPET clamps to the center gas-lift column and offers height from 15.4 to 20.5 inches and distance from 15.7 to 26.4 inches, with pin-lock positions. Its cushion measures 16.9 x 13 x 3.9 inches with a reinforced board and PU leather surface, and two casters lock.
It costs $35 less than VIVO and is a close sibling of MOYRPV, with slightly more detail on adjustments. Compared with the KALLORY it is a full cushion rather than a flip-away frame.
Best for most home offices with a standard gas-lift chair. The caveat is that the listing says to check clearance around the mounting clamp, and assembly is required.
Best for: Standard gas-lift office chairs
Check price on AmazonPros
- +Adjusts in height and distance
- +Locking casters hold it steady
- +Thick padded 3.9 inch cushion
- +Rotating support arm
Cons
- −Needs clamp clearance on chair base
- −Assembly required
VIVO Retrofit Height Adjustable Chair Footrest
About this pick
VIVO has a 23 x 14 inch cushion, 11 pin-locking length settings from 15.5 to 26.5 inches and a height range of 15.8 to 21.8 inches. It supports up to 242 lbs and is only compatible with 2 inch gas cylinders.
It is the priciest at $99.99, but the cushion is larger than BALAPET and the weight limit is stated. Versus MOYRPV it adds a lever for height.
Best for larger users and cross-legged sitters. The caveat is that it fits only 2 inch cylinders and costs more.
Best for: Larger users
Check price on AmazonPros
- +Large 23 inch cushion
- +Weight limit stated at 242 lbs
- +Eleven length settings
- +Cross-legged seating option
Cons
- −Highest price here
- −Only fits 2 inch cylinders
MOYRPV Office Chair Footrest with 5 Casters
About this pick
MOYRPV is an office chair footrest attachment with an adjustable PU pad that measures 16.9 x 13 x 3.9 inches and five swivel casters that lock with brakes. The listing says the footrest can be raised or lowered and moved closer to or farther from the chair, and that it keeps the support close to the chair.
At $55.99 it is $9 cheaper than BALAPET, which has the same pad size but gives more detail on height and distance ranges. Compared with VIVO, it is a smaller cushion and costs about $44 less.
Best for people who want a padded attachment with plenty of casters and a lower price. The caveat is that the highlights do not list the adjustment ranges, so check the product page for fit.
Best for: Budget padded attachment
Check price on AmazonPros
- +Five casters with brakes
- +Broad PU pad
- +Adjustable position
- +Lower price than BALAPET
Cons
- −Ranges not listed in highlights
- −Casters may roll on slick floors
KALLORY Telescopic Flip-Away Chair Footrest
About this pick
KALLORY is a stainless steel pull-and-flip telescopic frame measuring 16.14 x 14.56 x 0.78 inches. It can fold away when not in use and has a smooth tube pedal.
At $26.99 it is the cheapest attachment here, and it is a frame, not a cushion. Versus BALAPET it has no padding.
Best for people who want a leg rest that disappears. The caveat is no padding or weight rating.
Best for: Tidy flip-away use
Check price on AmazonPros
- +Flips away when not used
- +Lowest attachment price
- +Space-saving design
- +Clean integrated look
Cons
- −No padding
- −No weight rating listed
Loodmeo 18 Inch Chrome Foot Rest Ring
About this pick
Loodmeo is an 18 inch chrome-plated steel foot ring with a four-spoke center support that spreads weight evenly. The listing says it fits drafting stools, office chairs and task stools with a standard center gas lift cylinder, and it names workshops and cashier stations among its uses.
At $46.99 it costs $4 more than the Frassie rings and has a larger diameter than the 15.7 inch Frassie. Unlike the cushion attachments, it offers no padding, so you rest your feet on bare chrome.
Best for stools and task chairs where a ring is the standard fit. The caveat is a hard surface and that you must match the center column size before ordering.
Best for: Drafting stools
Check price on AmazonPros
- +Large 18 inch ring
- +Chrome steel build
- +Four spokes spread weight
- +Fits many task stools
Cons
- −No cushioning
- −Priced above Frassie
Frassie 17.7 Inch Chrome Foot Rest Ring
About this pick
Frassie's 17.7 inch ring is a 450 mm metal chrome foot ring with a 2.1 inch center hole and height adjustment. The listing describes a scratch-resistant finish and says the larger diameter is more comfortable than a ring the same size as the stool.
It costs $42.99, the same as the 15.7 inch Frassie, and is $4 cheaper than Loodmeo. The ring is a little smaller than Loodmeo's 18 inches but larger than its own 15.7 inch sibling.
Best for stools with a 2.1 inch center column that need a roomy ring. The caveat is that you must measure your column, and the surface is hard metal.
Best for: Stools with a 2.1 inch column
Check price on AmazonPros
- +Large ring diameter
- +Height adjustable
- +Metal build
- +Sturdy
Cons
- −Must match 2.1 inch center
- −Hard surface
Frassie 15.7 Inch Chrome Foot Rest Ring
About this pick
Frassie's 15.7 inch ring is a 400 mm foot ring with a 2.1 inch center hole, height adjustment and a stainless or metal build described as scratch-resistant. It is meant for office stools and drafting chairs.
It costs the same as the 17.7 inch Frassie at $42.99 and is the smaller of the two. Against Loodmeo it is cheaper and smaller.
Best for tight spaces or short users who do not need a wide ring. The caveat is the same as its sibling: measure your column and accept a hard metal surface.
Best for: Tight spaces
Check price on AmazonPros
- +Compact ring
- +Height adjustable
- +Metal build
- +Sturdy
Cons
- −Smaller ring
- −Hard surface
How We Evaluated These Foot Rests for Office Chairs
Each pick was assessed across 4 criteria weighted for real-world use.
Fit
We compared stated cylinder size and clearance notes.
Adjustability
We compared height and distance ranges.
Support
We compared cushion size and ring diameter.
Value
We weighed price, weight limit and extras.
How to Choose the Right Foot Rests for Office Chairs
By Chair Type
Match your chair.
| Your situation | Recommended pick |
|---|---|
| Standard gas-lift office chair | BALAPET Office Chair Footrest Attachment |
| Heavier user, 2 inch cylinder | VIVO Retrofit Height Adjustable Chair Footrest |
| Budget chair with casters | MOYRPV Office Chair Footrest with 5 Casters |
| Chair where the footrest should disappear | KALLORY Telescopic Flip-Away Chair Footrest |
By Budget
Real prices from this comparison.
| Price range | Recommended pick |
|---|---|
| $26 to $27 | KALLORY Telescopic Flip-Away Chair Footrest |
| $42 to $43 | Frassie 17.7 Inch Chrome Foot Rest Ring |
| $46 to $47 | Loodmeo 18 Inch Chrome Foot Rest Ring |
| $55 to $56 | MOYRPV Office Chair Footrest with 5 Casters |
| $64 to $65 | BALAPET Office Chair Footrest Attachment |
| $99 to $100 | VIVO Retrofit Height Adjustable Chair Footrest |
Cushion Attachment vs Foot Ring
Cushion attachment
Padded platform that clamps on. VIVO, BALAPET, MOYRPV and KALLORY fall here.
Foot ring
Chrome ring around the column. Loodmeo and both Frassie rings fall here.
Choose cushion for comfort, ring for stools.
By Mobility
Mobility.
| Your situation | Recommended pick |
|---|---|
| Casters that lock | BALAPET Office Chair Footrest Attachment |
| Five casters with brakes | MOYRPV Office Chair Footrest with 5 Casters |
| Flip away | KALLORY Telescopic Flip-Away Chair Footrest |
| No casters, fixed ring | Loodmeo 18 Inch Chrome Foot Rest Ring |
For a Home Office Chair Specifically
Look for
A compatible gas column, enough height range and locking casters.
In this comparison
BALAPET Office Chair Footrest Attachment lists height, distance and locking casters.
When to Spend More
Spend more if
You want a larger cushion and a stated weight limit (VIVO Retrofit Height Adjustable Chair Footrest).
Save if
You only need a simple fold-away rest, where KALLORY Telescopic Flip-Away Chair Footrest is enough.
Frequently Asked Questions
Will an attachment fit my chair?
Check the gas cylinder diameter and the clearance around the base. VIVO says it fits only 2 inch cylinders, and BALAPET asks you to check the mounting clamp space. If unsure, measure first.
Do the casters roll away?
Locking casters hold the footrest steady when engaged. BALAPET lists 2 and MOYRPV lists 5. Lock them while sitting.
Is a ring worth it over a cushion?
A ring is cheaper and sturdy but hard. A cushion is more comfortable for long sessions. Pick by how long you sit.
How do I set it up?
Remove the chair base cover if needed, clamp the attachment to the cylinder and adjust the pins. Follow the instructions in the box.
Can I use it with a standing desk?
Attachments suit seated work. Check that the footrest does not block the legs.
How do I clean a PU leather cushion?
Wipe it with a damp cloth and a mild soap, then dry it with a clean towel. Avoid harsh solvents that can crack the surface. Check the pivot points for dust that can interfere with the pins.
Bottom Line
best overall: BALAPET Office Chair Footrest Attachment - best overall pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →