3 Best Anker USB-C Ethernet Adapters in 2026
Anker sells both a basic Gigabit dongle and multiport hubs with Ethernet. We mapped the current lineup before ranking.
Comparison Table
| Pick | Product | |
|---|---|---|
| Best Overall (Simple Dongle) | Anker USB-C to Ethernet Adapter | Check price |
| Best 6-in-1 Hub | Anker 6-in-1 USB-C Hub with Ethernet | Check price |
| Best 8-in-1 Hub (4K@60Hz) | Anker 8-in-1 USB-C Hub with 4K@60Hz HDMI | Check price |
Prices are approximate. Check Amazon for current pricing before purchasing.
Anker's current USB-C Ethernet lineup spans a basic single-purpose Gigabit dongle up through 6-in-1 and 8-in-1 multiport hubs that add HDMI, extra USB ports, and pass-through charging alongside the Ethernet port.
We mapped the lineup by what each product actually adds beyond networking, since the right pick depends heavily on whether you need just wired internet or a full desk-setup hub.
6 Criteria to Look For Before Buying a Anker USB-C Ethernet Adapter
Key buying criteria so you get the right fit the first time.
USB-C is a connector, not a speed
A USB-C port can carry anywhere from 1Gbps to 10Gbps of Ethernet depending on the adapter's chipset and your host's actual USB generation. Check the exact Ethernet speed and required USB mode before assuming any USB-C adapter matches your needs.
Multi-gig speeds need a fast enough USB port
A 2.5G, 5G, or 10G adapter plugged into a basic USB 3.0 (5Gbps) port will not reach its rated Ethernet speed. 2.5G generally works on 5Gbps ports; 5G and 10G typically need a USB 3.2 Gen 2 (10Gbps) port or Thunderbolt/USB4 host.
Check OS and driver requirements before buying
Most Gigabit adapters are driver-free on Windows, macOS, and ChromeOS, but multi-gig adapters often need a manufacturer driver on Windows or specific Linux kernel versions, and some models exclude older Apple silicon chips entirely.
Confirm your specific device isn't excluded
Several adapters in this cluster explicitly do not work with Nintendo Switch, Android, or specific Mac chip generations. Read the compatibility list carefully rather than assuming a USB-C connector guarantees your device will work.
A CAT6 cable matters as much as the adapter
Even a genuine Gigabit-capable adapter will fall back to slower speeds over an old CAT5 cable. Use CAT6 or better for Gigabit, and CAT6A for 5G/10G speeds, to actually realize the adapter's rated performance.
PD passthrough wattage isn't automatically usable
An adapter rated for 100W or 140W Power Delivery passthrough only delivers that much power if you also supply a charger and cable rated for it. The adapter's rating is a ceiling, not a guarantee, without the matching charger.
3 Best Anker USB-C Ethernet Adapters in 2026
Anker USB-C to Ethernet Adapter
About this pick
A 1Gbps USB-C to Ethernet adapter with a sleek aluminum exterior and braided nylon cable, at just over half an inch thick and roughly the weight of an AA battery.
Backed by Anker's 18-month warranty and customer service. No specific driver or OS compatibility notes beyond standard USB-C 3.0 devices, a straightforward pick when you want a name-brand adapter without extra features.
Best for: buyers prioritizing 1gbps, usb-c 3.0
Check price on AmazonPros
- +Aluminum exterior and braided cable for durability
- +Extremely compact and lightweight design
- +Backed by Anker's established warranty and support
- +Simple, no-frills single-purpose adapter
Cons
- −No PD charging or extra ports
- −Requires CAT6+ cable to hit full 1Gbps
Anker 6-in-1 USB-C Hub with Ethernet
About this pick
Combines a PD charging input, HDMI (up to 4K@30Hz), Ethernet port, a USB-C data port, and 2 USB-A ports in one hub, letting a 65W wall charger pass through power to the connected laptop.
A genuine multiport solution rather than a single-purpose dongle, useful when you need display output and extra USB ports alongside wired networking from one device.
Best for: buyers prioritizing 6-in-1: pd, hdmi 4k@30hz, ethernet, usb-c, 2x usb-a
Check price on AmazonPros
- +Combines Ethernet with HDMI display output and extra USB ports
- +Pass-through charging keeps the laptop powered while docked
- +18-month Anker warranty and support
- +Reduces cable clutter versus separate dongles
Cons
- −4K output capped at 30Hz, not 60Hz
- −Bulkier than a single-purpose Ethernet dongle
Anker 8-in-1 USB-C Hub with 4K@60Hz HDMI
About this pick
Steps up to 4K@60Hz HDMI output (with a DP 1.4 laptop; 4K@30Hz on DP 1.2) plus a PD input port, built-in 7.48in USB-C cable, USB-C and 2 USB-A data ports at up to 10Gbps, Ethernet, and an SD/microSD card reader.
Anker specifies the hub itself requires 15W to operate and recommends a 100W PD charger and cable for adequate power. Explicitly not compatible with Linux, a real limitation to check before buying.
Best for: buyers prioritizing 8-in-1: 4k@60hz hdmi, ethernet, 10gbps usb, pd, sd/microsd
Check price on AmazonPros
- +4K@60Hz HDMI output, a real step up from 30Hz competitors
- +Built-in cable means nothing extra to carry or lose
- +10Gbps USB-A/C data ports for fast peripheral transfers
- +SD/microSD card reader included
Cons
- −Explicitly not compatible with Linux
- −Requires a 100W PD charger for adequate hub power, not included
How We Evaluated These Anker USB-C Ethernet Adapters
Each pick was assessed across 5 criteria weighted for real-world use.
Ethernet Speed & Chipset
Verified the actual rated Ethernet speed (1G/2.5G/5G/10G) and, where published, the specific Realtek, Marvell, or other controller chip driving it, rather than assuming USB-C connector shape implies a speed tier.
Host & OS Compatibility
Checked explicit USB generation requirements (USB 3.0 vs USB 3.2 Gen 2 vs Thunderbolt/USB4) and confirmed OS support, since several products in this cluster have real exclusions (Android, Nintendo Switch, older Apple silicon).
Real-World Documentation
Favored listings that publish honest real-world throughput or explicit host-speed caveats over ones that only quote the theoretical link rate.
Build Quality & Durability
Weighed braided cable construction, aluminum housing, and reinforced connectors, since these adapters see frequent plug/unplug cycles in daily use.
Genuine Feature Differentiators
Prioritized real differences like Wake-on-LAN, PXE boot, PD passthrough wattage, and multiport expansion over marketing language that repeats across nearly identical adapters.
How to Choose the Right Anker USB-C Ethernet Adapters
Simple Dongle vs Multiport Hub
| What you need | Best pick |
|---|---|
| Just wired internet, nothing else | Anker USB-C to Ethernet Adapter (basic) |
| Ethernet + HDMI + charging + USB ports | Anker 6-in-1 or 8-in-1 Hub |
| 4K@60Hz display output specifically | Anker 8-in-1 Hub (the 6-in-1 caps at 30Hz) |
Frequently Asked Questions
Does Anker's basic adapter and its hubs use the same Ethernet chipset?
Anker doesn't publish the exact chipset on any of its current listings, so we can't confirm whether the basic dongle and hub models share hardware. All three are rated for the same 1Gbps Ethernet ceiling regardless.
Is the 8-in-1 hub worth the price jump over the 6-in-1?
Only if you specifically need 4K@60Hz output; the 6-in-1 caps HDMI at 30Hz. If 30Hz is fine for your monitor use, the 6-in-1 saves money for the same core Ethernet, charging, and USB-A functionality.
Bottom Line
best overall: Anker USB-C to Ethernet Adapter - best overall (simple dongle) pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →