5 Best 4-Port PoE Network Switches in 2026
4-port PoE switches suit small camera or AP deployments where a full 5- or 8-port switch is more than needed.
Comparison Table
| Pick | Product | |
|---|---|---|
| Best 5-Port with 4x PoE | NETGEAR GS305P 5-Port PoE Gigabit Switch | Check price |
| Best Value | TP-Link TL-SG1005P 5-Port Gigabit PoE Switch | Check price |
| Best Fast Ethernet Budget | TP-Link TL-SF1005P 5-Port Fast Ethernet PoE Switch | Check price |
| Best with VLAN Isolation | YuanLey 5-Port Gigabit PoE Switch, 78W | Check price |
| Best with Extend Mode | hohtouying 4-Port Gigabit PoE Switch, 65W | Check price |
Prices are approximate. Check Amazon for current pricing before purchasing.
A 4-port PoE switch fits the specific case of powering a small handful of cameras or a couple of access points without buying more capacity than you'll use, common for a single-room camera setup or a small home network extending WiFi to one additional area.
We compared this cluster by real PoE budget per port and any extended-transmission features, since 4-port PoE switches vary meaningfully in how much power and distance they actually deliver despite similar port counts.
6 Criteria to Look For Before Buying a 4-Port PoE Network Switch
Key buying criteria so you get the right fit the first time.
Port count is a headroom decision, not a current-need one
Buy for what you'll plug in over the next 2-3 years, not just today. An 8-port switch that's already full the day it arrives means buying a second switch and daisy-chaining, which adds a hop of latency and another point of failure.
PoE budget is a shared pool, not per-port
A switch rated for 8 PoE+ ports at 120W total does not mean every port gets 30W simultaneously. Add up the real draw of every camera, AP, and phone you'll connect, and make sure the total budget clears it with room to spare.
Managed vs unmanaged changes what you can diagnose later
An unmanaged switch is zero-configuration but gives you no visibility when something goes wrong. A smart-managed switch adds VLANs, port mirroring, and traffic monitoring for a modest price increase, worth it the first time you need to isolate a misbehaving device.
Fanless does not always mean silent under load
Most desktop switches are genuinely fanless and silent, but high-port-count PoE switches sometimes add active cooling once the power budget climbs past 200-300W. Check for a fan explicitly if a quiet office or bedroom install matters.
Multi-gig speed needs matching cable and network gear
A 2.5G or 10G switch only delivers those speeds if your cabling is Cat5e or better (Cat6a for 10G) and the devices on both ends actually support that speed. Mixing a multi-gig switch into an all-Gigabit network gets you nothing extra.
Renewed enterprise gear needs a licensing check first
Cisco Meraki, Juniper, and some Aruba/HPE switches on Amazon are frequently sold as renewed hardware without an active license or support contract. Confirm what functions before assuming a discounted enterprise switch works like a new one out of the box.
5 Best 4-Port PoE Network Switches in 2026
NETGEAR GS305P 5-Port PoE Gigabit Switch
About this pick
The GS305P packs 4 PoE+ ports into a 5-port Gigabit switch with a 63W total power budget and dynamic PoE allocation that redistributes unused wattage to whichever connected device needs it most, useful when running a mix of cameras and access points with different draw.
It stays fully unmanaged and fanless despite adding power delivery, keeping setup at true plug-and-play. The compact metal housing supports desktop or wall placement for tight installs near cameras or APs.
Best for: buyers prioritizing 5 ports, 4x poe+ at 63w total
Check price on AmazonPros
- +Dynamic power allocation avoids manual budgeting
- +Compact enough for tight camera/AP closets
- +Fanless despite PoE power delivery
Cons
- −63W budget limits high-draw device counts
- −No per-port PoE control since it's unmanaged
TP-Link TL-SG1005P 5-Port Gigabit PoE Switch
About this pick
TP-Link's TL-SG1005P delivers 4 PoE+ ports at up to 30W each with a 65W total budget alongside 1 non-PoE Gigabit port, plus Port-based QoS and IGMP Snooping for prioritizing camera or VoIP traffic.
The metal shielded-port case is built for the same desktop or wall-mount flexibility as TP-Link's non-PoE models, and it carries the identical 3-year warranty and free technical support.
Best for: buyers prioritizing 4x poe+ ports @65w total, 1 uplink
Check price on AmazonPros
- +65W budget covers most camera/AP deployments
- +QoS built in despite unmanaged design
- +Consistent 3-year warranty
Cons
- −Only 1 non-PoE uplink port
- −No per-port power monitoring
TP-Link TL-SF1005P 5-Port Fast Ethernet PoE Switch
About this pick
The TL-SF1005P is a Fast Ethernet (10/100Mbps), not Gigabit, PoE switch with 4 PoE+ ports and a 67W combined budget, appropriate specifically for lower-bandwidth PoE devices like basic IP cameras or VoIP phones that don't need Gigabit speeds.
It shares the Extend Mode, Priority Mode, and Auto Recovery features of TP-Link's Gigabit PoE switches, just at Fast Ethernet speeds, making it a budget-appropriate choice when Gigabit throughput isn't the bottleneck.
Best for: buyers prioritizing 4x poe+ @67w total, fast ethernet
Check price on AmazonPros
- +Lower price appropriate for basic PoE camera/phone use
- +Extend and Priority modes carry over from Gigabit models
- +3-year warranty despite the lower price tier
Cons
- −Fast Ethernet only, not Gigabit, a real bottleneck for modern devices
- −Just 4 PoE ports
YuanLey 5-Port Gigabit PoE Switch, 78W
About this pick
YuanLey's 5-port switch includes 4 Gigabit PoE ports with a 78W total budget and one-key VLAN isolation that separates all PoE ports from each other to prevent network storms, a genuinely useful security feature for a budget unmanaged switch.
It auto-detects PoE and non-PoE devices without configuration, and the compact durable metal design with bilateral heat dissipation keeps it running cool across security monitoring, office, or home network deployments.
Best for: buyers prioritizing 4x poe ports @78w total
Check price on AmazonPros
- +One-key VLAN isolation is unusual on an unmanaged switch
- +78W budget solid for 4 PoE ports
- +Auto-detects PoE vs non-PoE devices
Cons
- −Budget brand, shorter track record than TP-Link/NETGEAR
- −Only 5 total ports
hohtouying 4-Port Gigabit PoE Switch, 65W
About this pick
This budget 4-port PoE switch includes 2 Gigabit uplink ports and 65W of PoE budget across 3 switch modes: CCTV mode for extended 820ft transmission, VLAN mode for port isolation, and default mode for standard 10/100/1000 speeds.
The listing is notably explicit about a real limitation: it only powers standard 48V wireless APs, not 24V passive PoE devices like some Ubiquiti gear, without an additional PoE splitter, an honest caveat worth checking before buying for a specific AP.
Best for: buyers prioritizing 4x poe ports @65w total, 3 switch modes
Check price on AmazonPros
- +3 switchable modes cover different deployment needs
- +Honest disclosure about 24V passive PoE incompatibility
- +4KV lightning protection included
Cons
- −Does not support 24V passive PoE devices without a splitter
- −Smaller, less established brand
How We Evaluated These 4-Port PoE Network Switches
Each pick was assessed across 5 criteria weighted for real-world use.
Port Count & Speed Tier
Verified the actual port count, Gigabit vs multi-gig speed rating, and whether every port runs at the advertised speed or only some do, since several switches mix full-speed and lower-speed ports.
PoE Power Budget
Checked the total PoE wattage budget against realistic device counts, not just the per-port maximum, since a switch's total power pool is what actually limits how many cameras or access points it can run.
Management Depth
Classified each switch as unmanaged, smart/easy-managed, or fully managed Layer 2/3, since this determines what troubleshooting and segmentation options are available after installation, not just at setup.
Build & Mounting Flexibility
Weighed fanless vs active cooling, metal vs plastic housing, and desktop/wall/rack mounting options against the switch's likely install environment.
Real-World Documentation Honesty
Favored listings that clearly state cabling requirements, host port requirements, and speed caveats over ones that only advertise the theoretical maximum.
How to Choose the Right 4-Port PoE Network Switches
Fast Ethernet vs Gigabit PoE
TP-Link's TL-SF1005P runs at Fast Ethernet (100Mbps) speeds, appropriate for basic cameras or VoIP phones that don't need Gigabit throughput. Every other switch in this list runs full Gigabit; choose based on whether your specific PoE devices actually benefit from Gigabit speed.
Frequently Asked Questions
Is a 4-port PoE switch enough for a small camera system?
For 3-4 cameras, yes, with one port typically reserved for the uplink to your router. If you expect to add more cameras later, consider an 8-port PoE switch instead to avoid needing to replace the switch entirely.
Bottom Line
best overall: NETGEAR GS305P 5-Port PoE Gigabit Switch - best 5-port with 4x poe pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon →